In our case, they are at the bottom of the screen.

If you are using Windows Vista or above operating system, you need confirm the UAC dialog to continue. In general, however, as the computer boots up, some important keyboard strokes are noted somewhere prominent on the screen. The Create Bootable USB Drive dialog will popup. The exact steps to do this vary depending on your BIOS – to get a detailed description of the process, search for your motherboard’s manual (or your laptop’s manual if you’re working with a laptop).

If the CD or floppy drive is not set to boot first, then you will need to access your BIOS’s boot menu, or the setup menu. In many cases, especially with floppy disks, this is done by default. To boot PLoP, you will need to have your CD or floppy drive boot with higher precedence than your hard drive.

You can also search for the same in the Start menu. First, right-click on the Start menu and select the Disk Management option. All you have to do is find the drive and take a look at its properties. Press the Write button to write PLoP boot manager to your floppy disk. Bootable USB drives are recognized as such in the Disk Management tool. Select your floppy drive, then click on the “…” button and browse to plpbt.img. We aren’t fortunate enough to have a floppy drive installed, but if you do it should be listed in the Floppy drive drop-down box. To do this, we’ll use a freeware utility called RawWrite for Windows. If your computer is old enough to still have a floppy drive, then you will need to put the contents of the plpbt.img image file found in PLoP’s zip file on a floppy disk.

How to check if usb is bootable